|
|
 |
Chinook |
 |
| Result pages: |
1 |
2 |
 |
See details
|
Chinook RDM Boom Shim
SKU: WSBM4214
Chinook RDM Boom Shim. Use with all Reduced Diameter Masts and ensures a no slip tight connection between booms and masts.
Our pricePrice: $12.00
|
See details
|
Anti Twist Washer Stainless
SKU: WSWP2144
Anti Twist Washer- Stainless Steel
Jaw-like teeth on this washer prevent your footstraps from twisting!
$.90 each (one)
Our pricePrice: $0.90
|
See details
|
Barrel Nuts - 1/4-20
SKU: WSWP2241
If you stripped out your fin inserts you will be ok, just replace the barrel nut.
1/4-20 is commonly used for Tuttle fins, but not necessarily.
6m is commonly used for Trim & Power fins, but not necessarily.
Our pricePrice: $3.50
|
See details
|
Barrel nuts - 6mm
SKU: WSWP2242
If you stripped out your fin inserts you will be ok, just replace the barrel nut.
1/4-20 is commonly used for Tuttle fins, but not necessarily.
6m is commonly used for Trim & Power fins, but not necessarily.
Our pricePrice: $3.50
|
See details
|
Chinook Channel Washer
SKU: WSWP2287
This washer is used in the 1 and 2 bolt rubber universal. The washer has a 2''diameter and the 1" channel is used to fit the Chinook safety strap.
Each universal has 2 washers, so order 2!
Our pricePrice: $0.40
|
See details
|
Chinook Spring Clip
SKU: WSWP2296
We have an assortment of spring clips to fit a variety of base cups. State your brand preference in the notes feild.
Our pricePrice: $5.00
|
See details
|
Chinook 5 Hole Adj. Insert
SKU: WSWP2299
If you are into building boards, make sure to use the Chinook 5-hole footstrap insert. The 5-hole gives you the most options for footstrap placement.
1-hole & 2-hole inserts also available.
Our pricePrice: $1.75
|
See details
|
Alum Vent Slot Screw W/O-Ring
SKU: WSWP2305
Chinook Aluminum Vent Slot Screw W/O-Ring. Nice to have an extra or two in your gear bag. Fits all vents on Chinook boxes as well as the majority of boards on the market.
Our pricePrice: $5.00
|
See details
|
Chinook Base Cup Kit W/Clip
SKU: WSWP2308
If your universal is loose and on the fritz it might be a good idea to replace the base cup. This kit is just the ticket. Save your dream session and spare yourself the long swim in. Replace your basecup.
Our pricePrice: $16.00
|
See details
|
Chinook Base Cup Only
SKU: WSWP2309
Chinook Base Cup Only
Don't throw out that ol' broken base because the top's broken, repair it with the Chinook Base Cup top piece and get back out on the water.
Our pricePrice: $8.50
|
See details
|
Chinook Q.R. Foot-Tool Tendon
SKU: WSWP2311
Chinook Q.R. Foot & Tool Tendon
Don't throw out that ol'broken base because the quick release is broken, repair it with the Chinook Q.R. Foot and Tool Tendon and get back out on the water.
Our pricePrice: $11.70
|
See details
|
Chinook Boom Collar Set 1-1/8
SKU: WSWP2312
Chinook Boom Collar Set 1-1/8"
For aluminum and carbon booms, save that dream session and carry an extra set in your gear bag.
Our pricePrice: $15.95
|
See details
|
Chinook Boom Grip
SKU: WSWP2313
If you have gnarly and tore up boom arms it might be time to re-grip your boom. Get that new boom feel with some new boom grip.
Chinook Boom Grip (2-pcs)
Comes in Black Only and is 4-5/8"wide X 72" long
Our pricePrice: $20.00
|
See details
|
Brass T-nut slider-8mm
SKU: WSWP2316
Chinook Brass T-nut slider-8mm
If you do not carry an extra one of these in your gear bag you are asking for it. Stock that gear bag up for your next windsurf adventure.
Oh, and most people have two nuts, not one.
Our pricePrice: $2.75
|
See details
|
Chinook Collar pin
SKU: WSWP2325
Chinook Collar pin
Used on Chinook's skinny extensions, if you need a new one it is easy to replace.
Our pricePrice: $2.75
|
See details
|
Deck Washer
SKU: WSWP2329
Chinook Deck Washer
Found on all Chinook bases. It is the bottom piece that protects the board from the swiveling universal.
Our pricePrice: $2.75
|
See details
|
Chinook Standard Ext Collar
SKU: WSWP2338
Chinook Standard Extension Collar
This collar is used on the older standard size (not skinny) Chinook extensions. Easy to replace.
Our pricePrice: $15.00
|
See details
|
Chinook Friction Pad Standard
SKU: WSWP2346
Chinook Friction Pad Standard
This friction pad is found in Chinook's tripple clamp boom heads. It is used to reduce the friction between the boom head and the mast. Not a bad idea to have a replacement in your gear bag.
Our pricePrice: $6.25
|
See details
|
Chinook In-Flight Out-Haul Kit
SKU: WSWP2348
If you find yourself coming back to the launch to adjust your out-haul, or if you are a racer and looking for quick-tune adjustments, this is for you.
The kit includes: 2 cleats, a double sail pulley, pre stretched 4mm line, 2 Ronstan pulley blocks, and 2 T-handles. This kit is compat...
Our pricePrice: $79.00
|
See details
|
Mast Base Ext End Cap RDM
SKU: WSWP2351
Chinook Mast Base Extension End Cap For Reduced Diameter Masts RDM
Keep sand and debris out of your mast base extension with this end cap
Our pricePrice: $2.50
|
See details
|
Chinook Mechanical U-Joint
SKU: WSWP2353
Chinook Mechanical U-Joint, not a bad idea to replace if you feel your joint is on the fritz. Don't be that guy/gal swimming your rig in!
Our pricePrice: $19.50
|
See details
|
Mistral 8mm Mast Track Slider
SKU: WSWP2359
Chinook Mistral Large 8mm masttrack slider nut. This item is to retrofit your old-style mast tracks to accept any new universal. The large brass nut will drop into your old foot-pedal operated mast track and allow you to screw in the new singe bolt "Chinook" style universal.
Our pricePrice: $13.00
|
See details
|
Chinook Hinged Collar
SKU: WSWP2365
Chinook Hinged Collar - Quick Adjust
With the Chinook Adjustable Hinged Extension Collar there are no parts to lose and adjustments are a snap. The Collar retro-fits on most standard diameter extensions.
Our pricePrice: $11.50
|
| Result pages: |
1 |
2 |
|
|
|
|
