2025 Carbon Wing Race Foilboard
2025 North Vector Race Wing Foil Board
North product code: 85013.250170
Race-tuned acceleration, sustained flight and low-drag control for riders chasing maximum speed and higher upwind angles.
The North Vector is a dedicated wing foil race board engineered to stay fast across an entire course—not just in a straight line. Its long, narrow outline lifts efficiently onto foil, while the aerodynamic profile, rounded rails and sharp tail release help preserve speed through chop, tacks and aggressive upwind angles. A full-wrap carbon PVC sandwich construction delivers the stiffness and durability required for high-load racing.
- 55L–85L Range
- Three Race Sizes
- Full-Wrap Carbon PVC
- DropBox 165 × 90mm
- Deep Tuttle Box
- V-Strap Inserts
Why You’ll Love It
Built for Sustained Speed
The Vector is tuned to remain efficient through changing water conditions, helping racers maintain speed instead of rebuilding momentum after every maneuver.
Higher Upwind Angles
Its narrow outline and raised bottom toward the rails provide clearance when the board is heeled, allowing committed upwind angles without catching an edge.
Fast Through Tacks
Efficient volume distribution and low aerodynamic drag help the board accelerate out of transitions, where maintaining speed can determine race position.
Two Foil-Mounting Options
Use the adjustable DropBox tracks with most plate-mounted foils or the carbon Deep Tuttle box with a dedicated race mast.
Technical Features
Aero/Hydro Hull Design
The board’s nose-to-tail cross section is shaped to reduce resistance both on the water and in the air, supporting faster flight and efficient recovery after touchdowns.
Long, Narrow Race Outline
The streamlined shape develops speed quickly on the surface, lifts efficiently onto foil and minimizes windage once airborne.
Rounded Hull and Rails
Rounded surfaces shed chop and swell rather than catching abruptly, allowing the rider to push harder through rough water and high-angle course sections.
Low-Drag Tail Release
A sharply defined release edge helps the tail separate cleanly from the water for efficient acceleration and faster lift onto foil.
Concaved Deck
The pronounced deck concave creates intuitive foot placement and acts as a counterbalance, so extreme board angles feel more controlled beneath the rider.
Full-Wrap Carbon PVC Sandwich
A carbon outer shell and high-density PVC foam wrap the full board, increasing stiffness, impact resistance and overall structural strength around a lightweight EPS core.
Non-Abrasive Max-Traction Deckgrip
Heat-embossed deckpads provide high traction with tactile and visual stance references for fast, repeatable foot placement during race maneuvers.
Adjustable V-Strap Inserts
Multiple insert positions accommodate regular or goofy stances and allow riders to personalize their race position. Footstraps are sold separately.
Performance-Tracker Inserts
Dedicated 76 × 39mm insert spacing supports a Sailmon Max or similar performance tracker when used with the appropriate custom adapter plate.
GORE Two-Way Vent
A factory-fitted waterproof vent helps regulate internal air pressure when the EPS core is exposed to significant temperature changes.
Digital Product Passport
Scan the board’s unique QR code to register it and access North services such as product information, Lost & Found and theft protection.
Included DropBox Hardware
Four titanium M8 × 30mm screws and four T-nuts are supplied for mounting a compatible plate-style foil to the DropBox tracks.
Full Board Dimensions and Rider Sizing
| Size | Length × Width × Thickness | Approx. Metric Dimensions | Volume | Intermediate Rider | Advanced Rider | Board Weight |
|---|---|---|---|---|---|---|
| 4'7 | 4'7 × 18.25″ × 4.625″ | 139.7 × 46.4 × 11.7 cm | 55 L | Under 55 kg / 121 lb | Under 65 kg / 143 lb | Not published |
| 5'0 | 5'0 × 20″ × 5″ | 152.4 × 50.8 × 12.7 cm | 70 L | Under 70 kg / 154 lb | Under 85 kg / 187 lb | Not published |
| 5'4 | 5'4 × 21.25″ × 5.375″ | 162.6 × 54.0 × 13.7 cm | 85 L | Under 85 kg / 187 lb | Over 85 kg / 187 lb | Not published |
Rider recommendations are North’s official guidance. Metric board dimensions are conversions rounded to the nearest 0.1cm. North does not publish finished board weights for this model.
Choosing Your Size
4'7 / 55L
The lowest-volume and narrowest option for lighter racers or advanced riders who prioritize minimum windage, agility and a compact flight feel.
5'0 / 70L
The middle size balances race stability and low drag. North recommends it for intermediate riders below 70kg and advanced riders below 85kg.
5'4 / 85L
The highest-volume option for heavier riders, rougher starts and conditions where additional flotation is valuable without moving away from a race outline.
Race Sizing
Competitive riders may choose less volume than recreational riders because they rely on stronger technique, powered equipment and precise starts.
Windance sizing tip: Follow North’s intermediate recommendation unless you already have reliable race starts, tacks and high-speed foil control. Volume that works for an expert competitor may be frustrating for a developing racer.
Who Is It For?
- Competitive wing foil racers seeking maximum speed and sustained flight.
- Advanced riders working on higher upwind angles and faster race transitions.
- Riders who want both plate-mount and Deep Tuttle foil compatibility.
- Foilers using performance trackers to analyze course speed and positioning.
- Experienced riders who prioritize aerodynamic efficiency over beginner-friendly width.
The Vector is a specialized race board, not a general-purpose beginner wing board. Its narrow widths require confident balance, takeoffs, touchdowns and foil control.
Foil, Footstrap and Tracker Compatibility
- DropBox: 165mm-long tracks with industry-standard 90mm spacing for compatible four-bolt plate masts.
- Deep Tuttle Box: Carbon Deep Tuttle mounting option for dedicated race foil masts.
- Footstraps: Adjustable V-Strap inserts for regular, goofy or strapless configurations; straps sold separately.
- Performance tracker: 76 × 39mm insert spacing for Sailmon Max or similar equipment using a compatible custom adapter.
- DropBox hardware: Four titanium M8 × 30mm screws and four T-nuts included.
- Deep Tuttle hardware: Screws and washers are not included. North specifies 13mm washers with a minimum thickness of 1.5mm.
Frequently Asked Questions
Is the Vector suitable for beginners?
No. The Vector is a narrow, specialist race board intended for intermediate and advanced riders with established takeoff and foil-control skills.
Why is the board so narrow?
The narrow outline reduces aerodynamic drag, develops efficient water speed and provides rail clearance when the board is heeled into aggressive upwind angles.
Can I use a standard plate-mounted foil?
Yes. The DropBox uses 90mm track spacing and is compatible with most foil masts using a standard four-bolt top plate.
Does it accept a Deep Tuttle race mast?
Yes. A carbon Deep Tuttle box is built into the board, but the required Deep Tuttle screws and washers are not included.
Are footstraps included?
No. The board has adjustable V-Strap inserts, but footstraps are sold separately.
How much does the board weigh?
North does not publish finished weights for the three Vector sizes. Retail shipping weights should not be treated as actual board weights.
Package Contents
- One 2025 North Vector Race Foilboard in the selected size.
- Four titanium M8 × 30mm DropBox screws.
- Four DropBox T-nuts.
- Factory-installed deckgrip and GORE two-way vent.
Foil, wing, footstraps, leash, boardbag, performance tracker, tracker adapter and Deep Tuttle mounting hardware are sold separately.