
In Stock
In Stock
Chinook 1" Board Vent W/Slot Screw
In Stock
In Stock
Chinook 1 In. Board Vent With Thumb Screw
In Stock
In Stock
"SILVER" Three-Piece Carbon Hybrid-Oval Friction Lock-Adjustable The Travel Model!! If you're packing around an inflatable, traveling in a com...
View full detailsIn Stock
Chinook 30mm Allen Tool Bolt - For Rubber Joint
In Stock
In Stock
Chinook 5 Hole Footstrap Insert If you are into building boards, make sure to use the Chinook 5-hole footstrap insert. The 5-hole gives you the mo...
View full detailsIn Stock
Chinook 5 Hole Footstrap Insert If you are into building boards, make sure to use the Chinook 5-hole footstrap insert. The 5-hole gives you the mo...
View full detailsIn Stock
Chinook 5/8" Retrofit Board Vent with Slot Screw
Chinook 5-8th Inch Retrofit Board Vent with Thumb Screw
In Stock
In Stock
Chinook Aluminum Vent Slot Screw with O-Ring. Nice to have an extra or two in your gear bag. Fits all vents on Chinook boxes as well as the majorit...
View full detailsIn Stock
Anti Twist Washer- Stainless Steel Jaw-like teeth on this washer prevent your footstraps from twisting! $.90 each (one)
In Stock
In Stock
If you stripped out your fin inserts you will be ok, just replace the barrel nut. 1/4-20 is commonly used for Tuttle fins, but not necessarily. ...
View full detailsIn Stock
In Stock
If you stripped out your fin inserts you will be ok, just replace the barrel nut. 1/4-20 is commonly used for Tuttle fins, but not necessarily. ...
View full detailsIn Stock
In Stock
In Stock
If your tuttle or power box fins have become unusable due to stripped threads, this Brass Barrel Nut 6 mm x 9 mm can help you and your fins sail sm...
View full detailsIn Stock
Chinook Boom Collar Set 1-1/4" The 1 pin original collars. For older Chinook aluminum and carbon booms, save that dream session and carry an extr...
View full detailsChinook Boom Collar Set 1-1/8" The 1 pin original collars. For older Chinook aluminum and carbon booms, save that dream session and carry an extr...
View full details