Built Around Pure Wave Energy

The ELXR converts wave energy into forward drive, helping you maintain speed and flow without needing constant pull from a hand wing or parawing.

Early Lift at Low Speed

Its powerful foil profile generates useful lift early, helping riders get flying in smaller waves, slower swell and lighter wind conditions.

Efficient Wave-to-Wave Pumping

Reduced pitch stability and a pump-focused profile let the foil move freely through the water, making it easier to carry speed and connect sections.

Dynamic Surf-Style Turning

The moderate aspect ratio balances glide with roll freedom, allowing fast direction changes, tight carving and a more active surf-inspired ride.

Efficient Glide

The ELXR carries speed through flatter sections and between waves, helping extend rides and reduce the effort needed to remain on foil.

Powerful Pumping

A low-speed lift profile and freer pitch response help transform rider input into forward movement for efficient wave connections.

High Maneuverability

Greater freedom in pitch and roll gives riders the control needed for dynamic bottom turns, cutbacks and surf-style direction changes.

Controlled Tip Breaches

High resistance to ventilation helps the foil maintain controlled flow if a wingtip briefly breaches the surface during hard carving.

650 — Maximum Speed & Control

Best for lighter or highly skilled riders in strong wind and steeper, more powerful waves who want the tightest turns and least surface area.

750 — Powered Wave Performance

A strong choice for medium-to-strong wind, steeper waves and experienced riders who want speed with slightly more low-end support than the 650.

850 — Versatile Performance Size

A broad-range option that balances glide, pumping and maneuverability for many riders across small-to-medium waves and varied wind strengths.

950 — Glide & Easy Connections

Designed for riders wanting stronger low-speed lift, efficient pumping and easy wave connections without losing the ELXR’s surf-oriented turning character.

1050 — Light-Wind Wave Flow

A higher-lift option for smaller or flatter waves, light wind and riders who prioritize early takeoff and sustained glide.

1250 — Maximum Low-Speed Support

The largest ELXR provides the earliest lift and greatest low-speed support for heavier riders, very light wind, small swell and prone-entry sessions.

Profile-Driven Design

CORE built the ELXR around its foil profile rather than chasing aspect ratio alone, prioritizing useful low-speed lift, energy retention and dynamic riding.

Moderate Aspect Ratio

Aspect ratios from approximately 8.0 to 8.8 balance efficient glide with roll response, pumpability and surf-style control.

Reduced Pitch Stability

Less locked-in pitch behavior gives the rider greater freedom to pump, redirect and follow the shape of the wave.

Consistent DNA Across Every Size

Every ELXR size is tuned to preserve the same core handling character, so selection is based mainly on rider weight, conditions and wave size rather than discipline.

Multi-Layer Carbon Laminate

A multi-layer carbon laminate balances low weight, structural stiffness and durability for direct response and consistent foil performance.

Individually Engineered Sizes

Each surface area has its own optimized shape and internal construction, preserving the intended ELXR handling across the complete range.

Wood-Core Sizes

The 650, 750 and 1250 use a wood-core construction selected to achieve the desired balance of flex, strength and response.

Epoxy-Core Sizes

The 850, 950 and 1050 use an epoxy core. CORE states that both internal constructions deliver the same riding characteristics.

Full CFS Compatibility

The ELXR works with all CORE CFS masts, fuselages and stabilizers, allowing riders to build and tune a complete foil around their preferred riding style.

Carbon or Aluminum Mast

Pair the ELXR with a CFS Carbon Mast for maximum stiffness and response or a CFS Aluminum Mast for a durable, versatile and value-focused setup.

Maximum Surf Freedom

Pair the ELXR with the 60cm CFS fuselage and 160cm² stabilizer for greater pitch freedom, efficient pumping and the most dynamic surf-oriented feel.

Choppy-Water Stability

Use the 64cm fuselage with the 190cm² stabilizer for more stability across pitch, roll and yaw while retaining responsive wave performance.

More Stability & Control

Larger stabilizers and longer fuselages increase control and tracking but reduce some of the ELXR’s loose, agile and surf-oriented character.

Recommended Board Style

CORE recommends midlength foil boards such as the Roamer S from 78L or the Chase, with final board volume selected around rider weight and skill.

Best Rider Profiles

• Wave foilers focused on carving, lines and flow
• Parawing riders who want efficient low-speed lift
• Riders connecting multiple waves through pumping
• Foilers who prefer active pitch and roll control
• Experienced riders seeking a surf-oriented front wing
• Riders already using or building a CORE CFS setup

What You’ll Notice on the Water

• Early lift at lower speeds
• Strong glide through flatter sections
• Efficient pumping between waves
• Quick roll response for carving
• More freedom in pitch control
• Controlled flow during brief tip breaches

Included with the ELXR

• 2026 CORE CFS ELXR Front Wing
• Premium fitted protective front-wing cover

You’ll Still Need

• Compatible CORE CFS fuselage
• CFS mast and mast base
• CFS stabilizer
• Compatible foil board
• Three M8x22 mounting screws supplied with the CFS fuselage

What is the CORE ELXR designed for?

The ELXR is a dedicated wave and parawing front wing designed for early lift, efficient pumping, connected rides and dynamic surf-oriented turns.

What sizes are available?

The ELXR is available in 650, 750, 850, 950, 1050 and 1250cm² sizes.

Is the ELXR a high-aspect foil?

No. CORE describes it as a mid-aspect wave front wing, with aspect ratios ranging from approximately 8.0 to 8.8 depending on size.

How should I choose an ELXR size?

Choose based on rider weight, wave size, wind strength and desired low-speed lift. Riders over 85kg should generally consider one size larger.

Is the ELXR good for pumping?

Yes. Its powerful low-speed profile and reduced pitch stability are designed to support efficient pumping and easier connections between waves.

What fuselage and stabilizer does CORE recommend?

CORE recommends the 60cm fuselage with the 160cm² stabilizer for maximum freedom and pumping efficiency, or the 64cm fuselage with the 190cm² stabilizer for more stability in chop.

Is the ELXR compatible with all CFS components?

Yes. The ELXR is part of CORE’s Compatible Foil System and works with all CFS masts, fuselages and stabilizers.

Does the ELXR include mounting screws?

No. The front wing includes a protective cover. The three M8x22 mounting screws are supplied with the CFS fuselage.

Can Windance help build a complete CFS setup?

Yes. Contact Windance with your weight, board, foil experience, local conditions and riding goals, and we can help match the ELXR with the right mast, fuselage and stabilizer.