Light-Wind Wing Foiling • Carbon Response • Foil Drive Compatible
2026 F-ONE ROCKET WING MIDLENGTH CARBON Wing Foil Board
Efficient glide for lighter wind. Direct carbon response for pumping and carving.
The 2026 F-ONE ROCKET WING MIDLENGTH CARBON is built for wing foilers who want efficient takeoffs in lighter wind and a responsive board once flying. A long, narrow outline brings glide and balance, while the stiff carbon composite construction sharpens foil feedback and pumping response. Seven sizes from 72L to 150L and a hull that accommodates Foil Drive give you options for freeride, carving and assisted foiling.
- Light-Wind Performance
- HD Foam Carbon Composite
- Seven Sizes: 72L–150L
- Foil Drive Compatible
- 90mm Carbon Twin Tracks
- Strap Inserts & Carry Handles
Explore the ROCKET WING MIDLENGTH CARBON in 3D
Rotate the product and zoom in to explore the details.
Why Choose the ROCKET WING MIDLENGTH CARBON?
Build Speed in Light Wind
The longer waterline, slim outline and parallel rails help the board accelerate efficiently, giving you useful glide as you work toward takeoff.
Support Where You Need It
Refined nose volume and a slightly wider tail add support before takeoff while preserving the narrow outline that makes the board easy to roll into turns.
Smooth Water Contact
The rounded forward hull helps the board glide through touchdowns. A step near the tail creates a clean release point as you accelerate back onto foil.
Responsive Once Flying
Carbon stiffness gives the board a direct feel when you pump or change direction. The reduced width lets you lean into carves without the bulky feel of a wide board.
Construction and Setup Features
HD Foam Carbon Composite
High-density foam, fiberglass and carbon fiber create a light, strong sandwich construction with resistance to heel pressure and dings. The carbon build adds stiffness and responsiveness for active foiling.
Carbon Twin Tracks
The 90mm track spacing accepts compatible four-bolt mast plates. Carbon tracks provide direct foil feedback and room to adjust the mast position for your preferred balance and foot pressure.
Foil Drive Compatible Hull
The revised bottom removes the central step ahead of the tracks to accommodate Foil Drive setups. Match the board, mast, assist system and mounting hardware when planning your installation.
Practical Everyday Details
Every size has footstrap inserts and a carry handle. A Breathable Valve automatically regulates internal pressure as environmental conditions change.
Board Dimensions and Specifications
F-ONE reference: 77268-0702C
| Size | Length × Width × Thickness | Metric Length × Width | Volume | Published Weight | Strap Inserts / Handle |
|---|---|---|---|---|---|
| 5'10" | 5'10" × 18.5" × 5" | 178 × 47 cm | 72 L | 4.6 kg / 10.1 lb | Yes / Yes |
| 6'0" | 6'0" × 19" × 5.5" | 183 × 48.5 cm | 82 L | 4.9 kg / 10.8 lb | Yes / Yes |
| 6'2" | 6'2" × 20" × 5.7" | 188 × 51.3 cm | 95 L | 5.3 kg / 11.7 lb | Yes / Yes |
| 6'4" | 6'4" × 21" × 5.9" | 193 × 53.8 cm | 105 L | 5.6 kg / 12.3 lb | Yes / Yes |
| 6'6" | 6'6" × 22" × 6.1" | 198 × 55.9 cm | 115 L | 5.9 kg / 13.0 lb | Yes / Yes |
| 6'8" | 6'8" × 23" × 6.4" | 203 × 58.4 cm | 130 L | 6.4 kg / 14.1 lb | Yes / Yes |
| 6'10" | 6'10" × 24.5" × 6.8" | 208 × 62.2 cm | 150 L | 7.0 kg / 15.4 lb | Yes / Yes |
Dimensions and kilogram weights are F-ONE’s published Carbon specifications. Pound values are rounded conversions; individual board weight may vary.
Choosing Your Size
| Volume Range | What to Consider |
|---|---|
| 72–82 L | The narrowest sizes, suited to riders comfortable balancing a lower-volume board. Choose these when your starting technique and conditions support less flotation. |
| 95–115 L | Middle sizes that balance glide, handling and starting support. Match the volume to your weight and the amount of flotation you need during lulls. |
| 130–150 L | Greater volume and width for more support before takeoff. Useful when rider weight, lighter wind or balance requirements call for extra flotation. |
Windance sizing tip: Match volume to your weight and starting technique, then check width for balance before takeoff. Favor more support for marginal wind and challenging chop; choose smaller sizes when your starts are reliable.
Which F-ONE Board Fits Your Riding?
| Model | Best Reason to Choose It |
|---|---|
| ROCKET WING MIDLENGTH CARBON | Efficient light-wind glide with a stiff, responsive carbon build for pumping, carving and Foil Drive-assisted sessions. |
| ROCKET WING MIDLENGTH | The same shape and riding program in Bamboo Deck Construction, for riders who prioritize the midlength’s glide and versatility. |
| ROCKET WING-S CARBON | A more surf-focused choice when wave maneuverability and committed carving are your main priorities. |
Frequently Asked Questions
Will my existing foil fit?
The Carbon Twin Tracks use 90mm spacing for compatible four-bolt top plates. Check your mast plate and use mounting hardware suited to the track system.
Is a Foil Drive system included?
This listing is for the board. Foil Drive compatibility describes the hull design; the assist system is purchased separately.
Are footstraps included?
Footstrap inserts are fitted to every size. Footstraps are sold separately, so you can set up the board for strapped or strapless riding.
Can I also use it for SUP foiling?
F-ONE identifies suitable sizes as an option for advanced riders in waves or short-period downwind conditions. Choose sufficient volume for your weight and paddling technique.
What’s Included
One 2026 F-ONE ROCKET WING MIDLENGTH CARBON board in your selected size, with its integrated Carbon Twin Tracks, footstrap inserts and carry handle.
Hydrofoil, wing, Foil Drive system and footstraps sold separately.
Need help choosing your setup? Call 1-800-574-4020. Tell us your weight, current foil and usual wind conditions, and we’ll help you choose your board size and check compatibility.