43.2V Gen2.5 Electronics
Higher voltage helps maintain punch deeper into a session and makes more efficient use of available battery capacity.
Gen2.5 Updated September 2026
Foil Drive’s all-rounder moves to a 43.2V Gen2.5 platform with 35.5 kg of maximum thrust, the 648Wh FM+ 650 battery and more usable power in the compact MAX format.
Not sure which battery, motor or mast setup fits your gear? Ask the Windance team, or browse the MAX+ collection.
What’s new
MAX+ keeps the compact, all-round character of Assist MAX, then adds Foil Drive’s higher-voltage Gen2.5 architecture. It is built for longer surf sessions, upwind access, flatwater starts, pumping practice, wake riding and faster recovery after a fall.
Higher voltage helps maintain punch deeper into a session and makes more efficient use of available battery capacity.
Compared with the Gen2 MAX High Power setup, the extra output helps the board accelerate and release onto foil more quickly.
The 648Wh FM+ 650 works directly with MAX+ and can also power Fusion when the correct FM+ Battery Adaptor is installed.
The molded FM+ 650 uses an intelligent BMS for battery percentage, status, health and live state-of-charge data in the controller and app.
The 43V 12A charger averages about 85 minutes for the FM+ 650 and includes Storage Mode for better long-term battery care.
The configured MAX+ kit includes the V3 Controller with Bump Guard and titanium M7 Split Bolts, plus Foil Drive App support on iOS and Android.
Shop the system
Choose the complete High Power kit, the Base Kit + Battery bundle, or individual MAX+ components. The bare Base Kit does not include a battery or motor.
One FD400 Base Kit, one FD401 FM+ 650 Battery and one FD333 High Power Motor Kit with Universal Mini Pod, 20 cm cable and three-blade setup.
View the Complete Kit
One FD400 Base Kit plus one FD401 FM+ 650 Battery and carry case. Includes the V3 Controller and 43V charger; motor and mounting setup are sold separately.
View the Base + Battery Bundle
MAX+ unit with V3 Controller, 43V charger and supplied accessories. Battery and motor are not included.
View the Base Kit
High Power V2 motor, Universal Mini Pod, removable 20 cm cable and three-blade setup for an existing foil mast.
View the Motor Kit
648Wh direct-fit battery for MAX+. Required with the bare Base Kit; also useful as an extra or replacement battery.
View the FM+ 650
Use an FM+ 650 battery in a Fusion system. MAX+ accepts this battery directly and does not need the adaptor.
View the Battery AdaptorFrom specs to the water
Our field test focuses on the details that matter when choosing an assist system: takeoff acceleration, upwind access, the installed ride feel and how rider inputs affect real-world runtime.
Acceleration and foil release across practical conditions.
What the compact MAX+ format feels like once flying.
How rider, gear, weather and throttle use change a session.
Windance test impressions are practical rider feedback; official product specifications control.
Power & compatibility
The 43.2V FM+ 650 is the direct-fit battery for Assist MAX+. Its 648Wh capacity, molded one-piece construction and intelligent BMS balance runtime, weight and cost. It can also power Fusion when the correct FM+ Battery Adaptor is installed.
Full output is available until approximately 10% state of charge before normal voltage sag. The V3 Controller and Foil Drive App can report charge, status and health.
Official runtime guide*
Compatibility check
Direct fit for MAX+; no battery adaptor required.
Fusion-only battery; it does not fit Assist MAX+.
Legacy MAX batteries and chargers do not work with 43V MAX+.
Compatible only when the FM+ Battery Adaptor is installed.
*Runtime is indicative, not guaranteed. Foil Drive’s September 2026 guide uses an 80 kg rider, 800 cm² foil and 5'0", 40 L board. E-foil figures use flat water at about 70% throttle; surf figures use 3 ft swell and under 5 knots. Skill, gear, conditions and throttle use change runtime. The 85-minute charging figure is an average with the specified 43V charger.
Choose your system
MAX+ is the balanced all-rounder in the Foil Drive range. Fusion prioritizes maximum power and runtime, while Slim keeps the system light for short assists and a performance-first ride feel.
For riders who prioritize maximum power and runtime, including riders over the MAX+ guidance range or demanding efoil-style use.
For broad foil-assist use, all ability levels and riders under 100 kg using small to mid-length boards.
For proficient riders who value the most responsive, agile ride feel and mainly need short bursts of assist for pop-up.
Generation change
| Specification | Assist MAX+ | Gen2 MAX High Power |
|---|---|---|
| Platform | Gen2.5 / 43V | Gen2 / 40V |
| Battery shown | FM+ 650 | MAX High Power |
| Capacity | 648Wh / 15Ah | 594Wh / 15Ah |
| Maximum thrust | 35.5 kg | 29.5 kg |
| Peak power | 2,150W | 1,862W |
| Sustained power | 1,750W | 1,455W |
| Minimum installed weight* | 6.71 kg | 5.91 kg |
| Installed length | 540 mm | 529 mm |
*Installed weight: MAX+ figure includes the unit, FM+ 650, Integrated High Power Motor, three-blade hub and propellers. A retrofit Mini Pod mounted at 20 cm adds approximately 360 g.
Runtime is shown in the FM+ 650 section because the current official guide separates e-foil and surf use by rider skill instead of using one universal number.
Plan the complete system
A complete MAX+ configuration combines the Gen2.5 system, the FM+ 650 battery and a compatible motor or integrated-mast option. Check all three against your foil and intended use.
Foundation
The bare FD400 Base Kit includes the MAX+ unit, V3 Controller, 43V charger and supplied accessories. It does not include a battery or motor.
View MAX+ Base KitPower
Add one direct-fit FD401 FM+ 650 battery. Buy it separately, or choose the Base Kit + Battery bundle if you want both in one product.
View Base + Battery BundleDrive
Choose Standard or High Power retrofit hardware, or a compatible integrated mast, for your exact setup.
View High Power Motor KitRetrofit motor choice
Value-focused starting point
More takeoff thrust
Important before ordering
The bare FD400 Base Kit includes neither a battery nor a motor. Confirm that your order contains one FM+ 650 battery and a compatible motor configuration unless you already own confirmed-compatible components.
Send us these details
Before you choose
Straight answers about the Gen2.5 platform, FM+ 650 runtime, charging, motor choices, compatibility and the parts needed for a complete Assist MAX+ setup.
Assist MAX+ is Foil Drive’s 43.2V Gen2.5 all-rounder. It balances power, runtime and ride feel for surf, upwind/downwind access, flatwater starts, pumping practice, wake riding and light e-foiling.
MAX+ moves from the 40V Gen2 platform to 43.2V Gen2.5 electronics and produces about 20% more sustained power and maximum thrust than the Gen2 MAX High Power setup. With the FM+ 650, it has 648Wh of capacity, 35.5 kg maximum thrust and 2,150W peak power.
No. The Gen2 MAX uses 40V batteries and charging hardware, while Assist MAX+ uses a 43.2V Gen2.5 platform. They are not cross-compatible.
The 43.2V FM+ 650 is the direct-fit battery for MAX+. The Fusion 860 and 40V Gen2 MAX batteries do not fit MAX+. Gen2 batteries are not compatible with the MAX+ system.
A complete MAX+ configuration requires the FD400 Base Kit, one FD401 FM+ 650 battery and a compatible motor configuration. Windance's Complete Kit bundles the Base Kit, battery and FD333 High Power retrofit motor kit. The Base Kit + Battery bundle includes the first two components but no motor. The bare Base Kit includes neither a battery nor a motor. Your board, foil and mast are separate.
Foil Drive’s September 2026 guide lists approximately 31 minutes for intermediate e-foiling and 52 minutes for advanced e-foiling. Surf guidance is approximately 40–50 minutes for intermediate riders and 55–70 minutes for advanced riders. These are indicative figures based on specific test conditions, not guarantees.
Foil Drive lists an average charge time of about 85 minutes with the specified 43V charger. Use Storage Mode and store the battery at 30–60% state of charge for longer periods. Always follow the current battery and charger manuals.
The Standard bundle is the value-focused starting point with a Universal Motor Pod and two-blade propeller setup. The High Power bundle uses the lower-drag Universal Mini Pod and three-blade setup for stronger takeoff thrust and more performance across assisted-foiling disciplines.
Yes, but not as a direct fit. A Fusion system requires the correct FM+ Battery Adaptor to use an FM+ 650 battery.
The optional V2 Propeller Guard adds bump protection around compatible V2 motors and propellers. It does not remove propeller risk, and it adds drag that can reduce runtime. Read the full system and motor warnings before use.
Choose Fusion when maximum power and runtime lead the decision, MAX+ for the broadest balance of assistance and ride feel, and Slim when a small, agile setup for short bursts is the priority. Your rider weight, board, foil and conditions should guide the final choice.
Get the complete setup right
Tell us what you ride and where you ride it. We’ll help you confirm the MAX+ system, FM+ 650, motor option and mast hardware before you place the order.